- Tap on the Hamburger Menu
- Tap on Add Device
- After selecting Unit Location, Tap on Environment and select your Air purifier Model
- Tap on Yes
- After scanning select your device. (Please allow for Bluetooth permission if asked)
- Please enter your Wifi ID and password. (Make sure you are connected to 2.4Ghz Wi-Fi already)
- After setup is complete, tap on Continue
- Tap on Device Settings
- Tap on Device
- Tap on Device setting
- Tap on QSensAI
- Set/Change value as per your requirement
(*The difference between device off (PM 2.5 value) and device on (PM 2.5 value) should be of 20. Also device will automatically turn on/off depending upon the PM2.5 value set)
- Power on the device
- Press and hold the Power button for 10secs till you hear “BEEP” sound & device will reboot and Power Button LED starts blinking to recommission the device in your Qubo account.
Filter life allows us to see how long the filter would last when new, it can run for around 15000 hrs~100 percent. It is important to understand that Filter life depends on the air quality, fan speed & usage pattern. The HEPA filter continues to capture dust, allergen & PM2.5 particles. However, particles tend to clog the filter pores & make the filter greasy that decreases the air flow. If you notice a clogged outer layer or a decrease in the air flow, replacing the filter would uplift the purification performance and ensure you breathe clean air throughout the year. Hence for optimal performance, replace the filter once an year or when the Qubo App indicates it's exhausted, whichever comes first.
When you replace the filter, make sure to reset the filter life.
It is important to clean the filter to ensure continuous air flow. You can use a dry cloth but DO NOT use water to clean it.
Scroll down and tap on Filter Life, and you can monitor your filter life.
Reset Filter Life: (From Application)
To reset filter tap on Reset Filter Life and tap on yes.
Reset Filter Life: (From Device)
For Model Q600:
Press and hold QSensAI and Timer Button for 5-10secs
For Model Q1000:
Press and hold Filter button for 5-10secs
- Scroll down and tap on Schedule
- Tap on add on Schedule
- Enter schedule name and select action and day to repeat the same. Finally tap on Add schedule.
In QSensAI (AI feature) the Air purifier will turn On/turn Off depending upon the PM2.5 value where as in Auto mode the Air purifier will only adjust the Fan speed depending upon PM2.5 value.
No, Air Purifier is not water resistant and hence touching the device panel with wet/oily hands can lead to short circuit or any damage in device.
The value in AQI graph is the average value of the AQI during that particular hour.
(For more details on AQI and PM2.5 visit the below link:)
- Tap on Device setting
- Tap on Wi-Fi setting
- Tap on Update Wi-Fi and follow in App steps
Yes, you can turn on/off your device remotely
(*Make sure your device has power supply on)
Scroll down and tap on Child lock and tap on Yes.
You can buy a new filter from below website and reset your filter life
Yes, Air purifier does come with Google/Alexa support
(*You can only turn on/off and set the fan speed using google/alexa support)
In Sleep mode the fan goes to low speed and the LED on the device are turned Off. You can turn on the same using application and as well as manually from device panel.
