- Power on the Air Purifier.
- Press and hold the Power button for 10 seconds until the LED blinks.
- Open the Qubo app → click on + icon at top right corner → Purifier.
- Select Purifier and click on your purifier model.
- Allow Bluetooth permissions if prompted.
- Enter your 2.4GHz Wi-Fi credentials to complete setup.
The Air Quality Index (AQI) is a combined score based on several pollutants such as PM2.5, PM10, ozone, carbon monoxide, nitrogen dioxide, and sulphur dioxide. It reflects outdoor city-level air but not the exact mix of pollutants in your home.
Your Qubo Air Purifier shows real-time PM2.5 readings — fine dust particles most harmful to health. Indoor PM2.5 levels drop faster when doors and windows are closed, so your purifier’s readings are often lower than outdoor AQI.
Qubo focuses on PM2.5 because it’s the most accurate and health-relevant indicator of indoor air quality.
This table shows how PM₂.₅ concentration levels correspond to Air Quality Index (AQI) values based on the official CPCB (India) standard. Higher PM₂.₅ levels indicate poorer air quality and greater potential health risks.
| Air Quality Category | AQI Range | PM₂.₅ (µg/m³) |
|---|---|---|
| Good | 0 – 50 | 0 – 30 |
| Satisfactory | 51 – 100 | 31 – 60 |
| Moderate | 101 – 200 | 61 – 90 |
| Poor | 201 – 300 | 91 – 120 |
| Very Poor | 301 – 400 | 121 – 250 |
| Severe | 401 – 500 | 251 – 500 |
Clean the outer pre-filter and sensor every 15-30 days for best
performance*.
*Depending upon the pollution surrounding your area and usage.
Steps for Q200, Q400, Q500, R250, R700
- Open the bottom panel to access the filter.
- Wipe the purifier and outer filter layer with a dry cloth or a soft toothbrush.
- Place the filter back and lock the bottom panel properly.
Steps for Q600, Q1000
- Open the back panel to access the filter.
- Wipe the purifier and outer filter layer with a dry cloth or a soft toothbrush.
- Place the filter back and lock the panel properly.
Replace the filter-
We recommend replacing the filter once every year for the best performance and avoiding any damage to the product.
a) Fan speed too high:The noise you hear from your Qubo
Smart Air Purifier is
generated by the motor and fan during operation.
Your purifier is designed to operate quietly; however, in certain
situations—such as while
sleeping or in a silent room—you may notice some sound.
If this happens, try reducing the fan speed manually or switching to
Sleep Mode for quieter
performance.
b) Qubo Smart Air Purifier gets too loud in Auto Mode:
When in Auto Mode, your
Qubo Smart Air Purifier uses advanced sensors to detect even slight
changes in air quality and
automatically adjusts the fan speed to restore clean air as quickly as
possible.
If you find the noise level too high, you can manually set the fan speed
to a lower level or
switch to Sleep Mode for near-silent operation.
- Q200 – up to 200 sq.ft
- Q400 – up to 400 sq.ft
- Q500 – up to 500 sq.ft
- Q600 – up to 600 sq.ft
- Q1000 – up to 1000 sq.ft
- R250 – up to 250 sq.ft
- R700 – up to 700 sq.ft
Note: Actual coverage and efficiency may vary depending on open windows, doors, or room layout.
